2280 Justin Trail
Alpharetta, GA 30004

Opening hours

Mon – Sat 8:00 am – 5:00 pm
Sun – Closed

Get your No-Hassle EXACTIMATE!

Carpet cleaning is a common home maintenance task, but often overlooked. Most homeowners assume that once the carpet has been installed and cleaned, the house will continue to look its best. The fact is that in order to keep the carpet clean, you have to take action now.

carpet cleaning

The first step in carpet cleaning is to remove any water stains that may still be present on the carpet. If the water has dried out after cleaning, there are several ways that you can deal with the problem. If the water was responsible for getting a stain on the carpet, you may be able to get the stain out with water from the bathtub. However, if the stain was caused by food that has sat on the carpet, this would not be a viable option.

First, try to clean up any water that is left in the carpet. When removing a water stain, make sure to use a solution that is specifically designed for cleaning up water. Avoid using regular household cleaners that are mixed with bleach as they will do more harm than good. For water stains that have dried out or don’t come out by themselves, use a solution that contains bleach. This type of solution is available at any local home improvement store.

Next, lightly rub the stained area using a small cotton swab soaked in a solution designed for cleaning up water. Start by rubbing in a circular motion to ensure that the water and stain are evenly distributed. Once you have covered the entire area, you can move on to rinsing the entire carpet.

Once the area has been rinsed, you should repeat the process of soaking the swab in the water and application of the solution. Continue repeating this process until the entire carpet has been soaked. Once the area has been rinsed, the entire carpet can be vacuumed to remove the water.

After cleaning the carpet, a final, strong rinse is necessary to remove any soap scum that was left behind after cleaning. Scum is invisible, but the soap is easy to see when it comes off the carpet. This is a crucial step in carpet cleaning because the scent of the soap can leave behind a lingering scent that can be unpleasant. If the dirt is left on the carpet long enough, it can build up and cause damage to the carpet fibers.

You should inspect the carpet after cleaning to be sure that the area was not missed while cleaning. Also, if the area where the stain appeared after cleaning has built up, you should vacuum the area again before proceeding. By doing so, you will be sure to remove any dirt that may still be left.

Carpet cleaning has specific steps that must be followed to ensure that the carpet remains as clean as possible. If you follow these steps, your carpet will remain the healthy, clean condition that you expected. By following the proper steps to keep your carpet clean, you can be assured that your carpet will remain beautiful and healthy for years to come.